HPE STOREONCE 5500

1
2
3
4
1
5
6
4
4
1
iLO
PS2
PS1
IOM A
IOM B
IOM A
IOM B
P1
IOM A
IOM B
IOM A
IOM B
P1P2
#4
#2
P2
P2
P1
6. The cabling for the third enclosure is now complete. The following diagram illustrates the cabling for all
four enclosures.
7. If you purchased additional HPE StoreOnce 44TB Capacity Expansion kits for the second enclosure at
the same time as the HPE StoreOnce 60TB Capacity Expansion kit, install the sets of 11 disks in
exactly the same sequence as described in Installing the Capacity Expansion Disk Pack, BB941A
on page 9.
8. If Remote Support via STaTS is configured, use the following StoreOnce CLI command to disable
remote event suppression:
system disable remoteeventsuppression “4th JBOD Capacity Upgrade”
9. Continue with Applying the License and Completing the RAID Expansion on page 41.
Fully expanded system
The following diagram illustrates the cabling for all four enclosures where two enclosures are above and
two enclosures are below the head server.
Fully expanded system 35