Applying the License and Completing the RAID
Expansion
When all the disks from the Capacity Upgrade Kit have been installed in the StoreOnce disk enclosures,
log on to the StoreOnce GUI as an Administrator.
The examples in this chapter illustrate how to use the StoreOnce GUI:
• To scan for storage
• To apply capacity licenses
• To expand storage capacity
You can also use StoreOnce CLI commands to carry out these tasks, as summarized in
Applying the
license on page 50. See also the HPE StoreOnce System CLI Reference Guide for more information.
Scan for storage
Procedure
1. Click Storage in the Navigator pane.
2. Select the Storage Configuration tab.
3. An Information dialog box appear that tells you to click Scan for Storage. Click OK.
Applying the License and Completing the RAID Expansion 41
To Next Page
Loading...
