HPE STOREONCE 5500

Procedure
1. Ensure that you have a note of the Node Lock Serial Number from the License Management page
on the StoreOnce GUI, as described in the previous section.
2. Go to the HPE Licensing web site, as directed in the license entitlement certificate.
3. Log in using your HP Passport user ID and password.
4. Obtain the unique LTU key as instructed on the License Entitlement Certificate. You may use Cut and
Paste to copy it to a temporary file or save it to a .DAT file.
NOTE:
If you save the LTU as a .DAT file, use an sftp application to copy it to the HPE StoreOnce System
licenses directory. For instructions, see the user guide for your product.
5. Use the StoreOnce GUI to apply the license, as described in the next section.
Licensing and adding storage to the HPE StoreOnce
System
This section describes how to use the StoreOnce GUI to apply the redeemed license, create a new
volume and expand the file system. To use the StoreOnce CLI instead of the GUI, see
Applying the
license on page 50.
Procedure
1. Click License Management in the Navigator pane.
2. Look at the Capacity Expansion Licenses section. There are no Capacity Expansion Licenses yet.
3. Click Add License.
Licensing and adding storage to the HPE StoreOnce System 43