Hardware page
There is one pool and associated volume for each disk enclosure. You can view this on the StoreOnce
GUI under:
Hardware — Storage Clusters — Storage Cluster 1 — Pool (C2_P1) andHardware — Storage
Clusters — Storage Cluster 1 — Pool (C2_P2).
NOTE:
C3 and C2 refer to the slots in which the RAID controller cards are installed in the server. This example is
from a basic configuration with the disk enclosure attached to the RAID card in PCIe slot 2.
The following example shows the Hardware tree expanded to view the information displayed during
parity initialization. The status is degraded throughout the Storage Clusters hierarchy.
Hardware page 49
To Next Page
Loading...
