47
Figure 4-1-9
1)、Steering bottom seat
2)、Cushion
3)、Hexagon open-groove nut M14
4)、Cotter pin 3.2×32
2.Fix the steering vertical column onto the frame with hexagon flange
bolt M8*60 (2pcs), supporting stent (1pcs), inner and outer supporting
bracket (2pcs), stop reverse piece (1pcs) and collar pipes (2pcs). (Figure
4-1-10)
Fastening Torque of M8*60 Bolt: 26-30N.m
Caution: inner surface of the supporting brackets must be
greased with lithium lubrication.
To Next Page
Loading...