To Next Page

To Previous Page

MANUFACTURER’S WARRANTY

It is expressly agreed that there are no warranties, expressed or implied, made by either the

Salesman, Dealer, or HTP America, Inc. on products or parts furnished hereunder, except the

Manufacturer’s Warranty against defective materials or workmanship as follows:

HTP America, Inc. warrants each new HTP Mig 130 to be free from defects in material and work-

manship under normal use and service for three years after delivery to the original purchase.

HTP America, Inc. will repair and replace, at its factory, any part or parts thereof, products to be

returned to HTP America, Inc. with transportation charges prepaid and which its examination

shall disclose to its satisfaction to have been thus defective. This warranty being expressly in lieu

of all other warranties, expressed or implied, and all other obligation or liabilities on its part and

it neither assumes nor authorizes any other person to assume for it any other liability in connec-

tion with the sale of its machines.

This warranty shall not apply to any welding machine which has been repaired or altered by

unauthorized service departments in any way so as in the judgment of HTP America, Inc. to

affect its stability and reliability, nor which has been subjected to misuse, negligence or accident.

HTP America, Inc. shall not be liable in any event, unless HTP America, Inc. receives notice of

alleged breach of warranty within 30 days after the discovery, actual or construction alleged

breach of warranty specifying the claimed defect.

HTP America, Inc. has reserved the right to make changes in design or add any improvements to

its products at any time without incurring any obligation to install same on equipment.

This warranty is void unless warranty card is sent to HTP America, Inc. within 15 days from the

date of purchase.

Exclusions to Warranty:

The welding gun is warranted for a period of ninety (90) days against defects in

materials and workmanship.

The swan neck, nozzle spring, contact tips, gas nozzles, and liners are consumable

items, WHICH CARRY NO WARRANTY.

NOTE: This warranty is to the original purchaser only. The warranty can be transferred to

another owner, with HTP's approval, for a warranty transfer fee. HTP America, Inc. must

be notified within fourteen (14) days of the sale and must be provided with the contact

information of the original owner, the contact information of the new owner, and the

serial number of the machine.

HTP MIG 130 User Manual

Questions and Answers: