52
Function: Allows the user to adjust the temperature measurement to either Fahrenheit or Celsius
(Factory default is F = Fahrenheit).
Clock Settings
(Note: The clock will reset if the boiler is powered off for more than a week.)
Function: Changes the clock from 12 hour mode (8:45 PM) to 24 hour mode (20:45). To change to 24
hour mode when this screen is displayed, press the ENTER key. The letter (A or P) after the time will
blink. Press ▲ or ▼ once and the letter will disappear. Press the ENTER key to save the new setting.
Function: Allows the user to adjust the hour setting.
Function: Allows the user to adjust the minute setting.
Function: Allows the user to adjust the day of week displayed.
Function: Allows the user to switch to European date format (2009/08/28) from US format (08/28/2009).
Function: Allows the user to adjust the year setting.
Function: Allows the user to adjust the month setting.
To Next Page
Loading...
