Huawei AR120 Series - Page 105

l The router installation position in the cabinet is determined and arranged properly.
l The router to be installed is available and located near the cabinet for convenient
movement.
NOTE
l The procedures and methods for installing AR2240 and AR2240C routers into a cabinet are the
same. The following procedure installs an AR2240 router into cabinet.
l The procedures and methods for installing AR3260 and AR3670 routers into a cabinet are the
same. The following procedure installs an AR3260 router into cabinet.
Tools and Accessories
l Phillips screwdriver
l Flat-head screwdriver
l Floating nuts
l Mounting brackets
l M4 screws
l M6 screws
l L-shaped guide rails (separately purchased)
Procedure
Step 1 Use a Phillips screwdriver to fix the mounting brackets to both sides of the router with M4
screws.
NOTE
The mounting brackets can be installed on both sides close to the front panel or rear panel.
l Figure 7-1 shows installation of mounting brackets on an AR2240.
l Figure 7-2 shows installation of mounting brackets on an AR3260.
Figure 7-1 Installing mounting brackets on an AR2240
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99