Figure 9-54 Holding the male and female unshielded connectors
Step 2 Feed the male connector into the female connector, as shown in Figure 9-55.
Figure 9-55 Feeding the male connector into the female unshielded connector
Step 3 A crisp click indicates that the connector is locked by the locking key. Pull the connector
slightly and ensure that it is securely connected. Figure 9-56 shows an installed Ethernet
connector.
Figure 9-56 Installed unshielded Ethernet connector
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
9 Appendix
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
168
To Next Page
Loading...
