Huawei AR120 Series - Page 47

ON
OFF
~100-240
V
;50/60Hz;3A
+12V; 11.5A
LINK
ACT
SLOT CARD
E1
AR2202-48FE
LINK
ACT
SA
LINK
ACT
Step 6 Connect the RPS AC power cable.
Connect one end of the RPS AC power cable to the power jack of the RPS150 and the other
end to an AC power outlet. Connect the RPS AC power cable to the same power supply
system as the router or a different power supply system, depending on the reliability
requirement.
Figure 5-1 Same external power supply system for the RPS150 and router
ON
OFF
~100-240V
;50/60Hz;3A
+12
V; 1
1.5A
LINK
ACT
SLOT CARD
E1
AR2202-48FE
LINK
ACT
SA
LINK
ACT
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41