Huawei AR120 Series - Page 46

ON
OFF
~100-240V
;50/60Hz;3A
+12
V; 1
1.5A
LINK
ACT
SLOT CARD
E1
AR2202-48FE
LINK
ACT
SA
LINK
ACT
LINK
ACT
1U
h4
Step 4 Move the RPS150 into the cabinet. Support the bottom of the RPS150 with one hand and
tighten the M6 screws on the mounting brackets with the other hand. Tighten the lower screws
first, and then the upper screws.
ON
OFF
~100-240V
;50/60Hz;3A
+12
V; 1
1.5A
LINK
ACT
SLOT CARD
E1
AR2202-48FE
LINK
ACT
SA
LINK
ACT
LINK
ACT
Step 5 Connect the RPS cable.
1. Put the TOP side of the RPS cable plugs upwards. Connect one end of the RPS cable to
the RPS input interface on the router, and connect the other end to the RPS output
interface on the RPS150.
2. Tighten the captive screws at two sides of the RPS cable plugs clockwise.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40