Huawei AR120 Series - Page 59

Context
Before you power on the router, check and ensure the following:
l The power adapter is correctly connected.
l The input voltage is in the range of 90 V AC to 264 V AC.
Procedure
l Power on the router.
Turn on the power switch of the power supply system, and then turn on the power switch
on the router to start the router.
After the router starts, check indicators on the front panel to check whether the router
runs normally. Figure 5-3 describes the indicator states when the router is running
normally.
Figure 5-3 Normal indicator states on the router
PWR
AR2200 Series
EN
EN
CON/AUX
ACTL/A
GE1
GE0
MANAGE
SYS
WAN
RPS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
PWR
A
R22
00
S
erie
s
SYS
WAN
RPS
0
1
2
3
Indicator
Description
PWR Steady green: The system power supply
is normal.
SYS Slow blinking green: The system is
running properly.
l Power off the router.
NOTICE
Powering off the router will interrupt all the services on the router. Exercise caution
when you perform this operation.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53