Huawei AR1200 Series - Page 15

Step 4 Run:
sipag mgid
A SIP AG is created and the SIP AG view is displayed.
Step 5 Set mandatory parameters on the SIP AG interface.
Parameter Command Remarks
Media IP address media-ip { media-ip | media-addr-
name media-addr-name }
The media IP address
of the SIP AG interface
must be obtained from
the media IP address
pool.
Signaling IP address signalling-ip { signal-ip | signalling-
addr-name signal-addr-name }
The signaling IP
address of the SIP AG
interface must be
obtained from the
signaling IP address
pool.
Signaling port number signalling-port signalling-port-value By default, no
signaling port number
is configured for a SIP
AG interface.
Mode in which the IP
address of a proxy server
is obtained
proxy-address-mode { static | dns-a |
dns-srv | dns-naptr }
Mode in which the IP
address of a proxy
server is obtained:
l When the static
mode is used,
configure an IP
address and a port
number for the
primary proxy
server.
l When the DNS-A,
DNS-SRV, or
DNS-NAPTR
mode is used,
configure a domain
name for the
primary proxy
server.
Paramet
ers for
the
primary
proxy
server
IP address primary-proxy-ip primary-proxy-ip-
value1 [ primary-proxy-ip-value2 ]
By default, no IP
address is configured
for the primary proxy
server.
Domain name primary-proxy-domain primary-
proxy-domain-name
By default, no domain
name is configured for
the primary proxy
server.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice 1 SIPAG Configuration
Issue 03 (2011-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9