Parameter Command Remarks
Port number primary-proxy-port primary-proxy-
port-value
By default, no port
number is configured
for the primary proxy
server.
Transmission protocol transfer { tcp | udp | sctp } By default, a SIP AG
interface uses the User
Datagram Protocol
(UDP) protocol as the
transmission protocol.
Home domain name home-domain home-domain-value By default, no home
domain name is
configured for a SIP
AG interface.
Step 6 Set optional parameters on the SIP AG interface.
Parameter Command Remarks
Description description description By default, no
description is
configured for a SIP
AG interface.
Profile index profile profile-index By default, the profile
index of a SIP AG
interface is 1.
Domain name ag-domain ag-domain-name By default, no domain
name is configured for
a SIP AG interface.
Conference factory URI conference-factory-uri uri By default, no
conference factory
URI is configured for a
SIP AG interface.
Authent
ication
paramet
ers
Authenticatio
n mode
auth-mode { interface | user } By default, the
authentication mode is
user.
Authenticatio
n user name
auth-username auth-username By default, no
authentication user
name is configured for
a SIP AG interface.
Authenticatio
n password
auth-password auth-password By default, no
authentication
password is configured
for a SIP AG interface.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice 1 SIPAG Configuration
Issue 03 (2011-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
To Next Page
Loading...
