BoostLi Energy Storage Module ESM-48100B1
User Manual
2 Application Description
Copyright © Huawei Technologies Co., Ltd.
1. After the site power supply is disconnected due to a mains outage, the power supply is
not recovered for a long time because the faults (such as cable faults) cannot be rectified
in a timely manner.
2. After installation and commissioning are complete, the mains power is switched off
directly without powering off the ESM. The ESM can enter the low power mode only
after being completely discharged, and the interval for onsite acceptance check is long.
3. Other reasons result in that the ESM cannot enter the low power mode normally.
To Next Page
Loading...
