BoostLi Energy Storage Module ESM-48100B1
User Manual
3 Transportation and Storage
Copyright © Huawei Technologies Co., Ltd.
3 Transportation and Storage
3.1 Transportation Requirements
The product passes the certifications of the UN38.3 (UN38.3: Section 38.3 of the sixth
Revised Edition of the Recommendations on the Transport of Dangerous Goods, Manual of
Tests and Criteria) and SN/T 0370.2-2009 (Part 2: Performance Test of the Rules for the
Inspection of Packaging for Exporting Dangerous Goods). This product belongs to class 9
dangerous goods.
The product can be delivered to the site directly and transported by land and water. The
packing case must be secured for transportation, compliant with related national standards,
and printed with marks such as anti-collision and moisture prevention. Dispose of waste
ESMs in strict accordance with local laws and regulations.
Protect the packing case with the product from the following situations:
Being dampened by rains, snows, or falling into water
Falling or mechanical impact
Being upside-down or tilted
3.2 Storage and Recharging
3.2.1 Storage Requirements
1. Place ESMs according to the signs on the packing case during storage. Do not put ESMs
upside down or sidelong.
2. Stack ESM packing cases by complying with the stacking requirements on the external
package.
3. The storage environment requirements are as follows:
− Ambient temperature: 0–40°C; recommended storage temperature: 20–30°C
− Relative humidity: ≤ 95%
− In a dry clean place with proper ventilation
− In a place that is away from corrosive and organic substances (including gas)
− In a place free from direct sunlight
− At least 2 meters away from heat sources (such as a heater)
To Next Page
Loading...
