15
Name Configuration
Note:
VPI =
Virtual Path Identifier
VCI =
Virtual Channel Identifier
3.3.2 Steps
Configure the following equipment:
z The HG520s
z Your computer
1. Configuring the HG520s
Follow the steps:
(1) Log in to the Web configuration page of the HG520s. For the
procedure, refer to "
2.3 Establishing Configuration
Environment."
(2) Select Basic > WAN Setting in the navigation tree to
display the WAN configuration page.
(3) In the WAN configuration page, select the PVC that needs to
be configured.
(4) Set Mode to Bridge. Configure relevant parameters in
Figure 3-2 according to the values in the Table 3-2.
To Next Page
Loading...
