27
Chapter 4 Advanced Configuration
This chapter introduces the method for deploying the advanced
configuration of HG520s.
4.1 Preparation
Follow the steps described below:
(1) Log in to the Web configuration page of HG520s. For the
procedure, refer to "
2.3 Establishing Configuration
Environment."
(2) Select Advanced Configuration in the navigation tree to
display the advanced configuration page.
4.2 Configuring the RIP
You can enable the routing list to be automatically updated
through configuring the RIP.
Figure 4-1 Configuring the RIP
Name Description
RIP Direction
Select the direction of communication of RIP:
None/Both/In only/Out only
RIP Version Select a RIP version
To Next Page
Loading...
