23
3.7 Configuring the RFC2684 (IPoA) Mode
Configuring the RFC2684 (IPoA) mode is similar to configuring the
RFC2684 (IPoA) mode. The only difference is that you have to select
RFC2684 (IPoA) in the PVC configuration mode to configure IPoA. For
details, refer to
3.6 "Configuring the RFC2684B Mode."
3.8 Configuring the Wireless Mode
In the Wireless mode, the HG520s makes you access the Internet
without connecting a cable.
This section describes the process to configure the HG520s to
work in the Wireless mode and the process to configure your computer
to access the Internet through the HG520s.
3.8.1 Preparation
Table 3-5 shows the configuration for the Wireless mode.
Table 3-5 Configuration for the Wireless mode
Name Configuration
Access point Enable
Channel ID Select your country and district
Authentication type
There are three types:
z OpenSystem
z WEP-64Bits/WEP-128Bits
z WPA-PSK/WPA2-PSK
802.11b/g
There are three types:
z 802.11b
z 802.11g
z 802.11b/g
To Next Page
Loading...
