37
Name Description
Access Control Setup
ACL To enable ACL; Default is disabled
Access Control Editing
ACL Rule Index 1~16
Active To activate a rule
Secure IP Address Fill in allowed IP address; 0.0.0.0 means all IPs
Application Select Web/FTP/Telnet/SNMP/Ping/All
Interface Select WAN/LAN
All activated rules will be listed in “Access Control Listing”.
4.9 Configuring the UPnP
UPnP can identify PnP devices on network after activated.
Figure 4-8 Configuring the UPnP
To Next Page
Loading...
