Huawei EchoLife HG520s

www.4GSource.net
24
Name Configuration
Encryption
There are two types (found in the
authentication type of
WPA-PSK/WPA2-PSK):
z TKIP
z AES
3.8.2 Steps
Follow the steps described below:
(1) Log in to the Web configuration page. For the procedure,
refer to "
2.3 Establishing Configuration Environment."
(2) Select Basic > Wireless LAN in the navigation tree to
display the Wireless configuration page.
(3) In the Wireless configuration page, enable the Access Point
and configure the relevant parameters according to the
values in
Table 3-5.
(4) Select one of the Authentication Type. Configuring the
mode of OpenSystem in
Figure 3-5, the mode of
WEP-64Bits/WEP-128Bits in
Figure 3-6, the mode of
WPA-PSK/WPA2-PSK in
Figure 3-7.
Figure 3-5 Configuring the mode of OpenSystem