39
5.2 Changing the Administrator Password of the
HG520s
The Web manager of the HG520s provides the password
protection function to prevent illegal users from changing the
configuration of the HG520s. The username and the password of the
HG520s are configured by default. To change the administrator
password, follow the steps:
(1) Log in to the Web configuration page of the HG520s. For the
procedure, refer to
2.2 (4)"2.3 Establishing Configuration
Environment."
(2) Select Tools > System Management in the navigation tree
to display the system management configuration page.
(3) Find the username in the configuration page of system
management. Click the corresponding editing icon to display
the password configuration page.
(4) Enter the new password in the password configuration page.
Click Submit.
5.3 Restoring the Default Factory Settings
Caution:
When you restore the default factory settings, the custom data may be
lost.
There are two options to restore default factory settings:
1. Using the Reset button
Follow the steps:
(1) Find the Reset button in the rear panel of the HG520s
To Next Page
Loading...
