Huawei EchoLife HG8110 User Manual

f. Configure multicast parameters.
a. In the navigation tree, choose Services > IGMP. Select IGMP and enter
proper values.
– WAN Port IGMP Switch: Enable
– Proxy Switch: Disable
– Snooping Switch: Enable
NOTE
The ONT multicast modes (IGMP proxy and IGMP snooping) conflict. Only one mode is
supported at a time.
g. Configure a routing policy.
a. In the navigation tree, choose Layer 3 Forwarding > Policy Route. Select
Policy Route, right-click, and choose Add from the shortcut menu.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
127

Huawei EchoLife HG8110 Specifications

General

Brand	Huawei
Model	EchoLife HG8110
Category	Touch terminals
Language	English