Figure 4-7 PPPoE dialup emulation
Step 7 Click Start. After the test is complete, test results are displayed on the NMS.
----End
4.5.2 Querying the Physical State of a POTS Port
This topic describes how to verify whether a POTS port is in the normal state by querying the
physical state of the POTS port on the NMS.
Prerequisite
l The user is a user with the operator authority or higher.
l The OLT and the NMS communicate with each other properly.
l The NMS is able to discover an online ONT and VoIP service parameters are configured.
Procedure
Step 1 In the Physical Map navigation tree on the Main Topology tab page, double-click the target
OLT, or select the target OLT, right-click, and choose NE Explorer.
Step 2 In the navigation tree, choose GPON > GPON Management.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 4 Maintenance and Troubleshooting
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
286
To Next Page
Loading...
Need help?
General
