Huawei EchoLife HG8110 User Manual

huawei(config-if-gpon-0/1)#display ont autofind 1
//After this command is executed, the information about all ONTs
connected to
the GPON port through the optical splitter is displayed.
---------------------------------------------------------------------
---
Number : 1
F/S/P : 0/1/1
Ont SN : 6877687714852900
Password :
VenderID : HWTC
Ont Version : 120D0010
Ont SoftwareVersion : V1R002C06
Ont EquipmentID : 247
Ont autofind time : 2010-12-10 14:59:10
---------------------------------------------------------------------
---
Number : 2
F/S/P : 0/1/1
Ont SN : 6877687714852901
Password :
VenderID : HWTC
Ont Version : 120D0010
Ont SoftwareVersion : V1R002C06
Ont EquipmentID : 247
Ont autofind time : 2010-12-10 14:59:12
---------------------------------------------------------------------
---
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 1 sn-auth
6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 2 sn-auth
6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10
NOTE
If multiple ONTs of the same type are connected to a port and the same line profile or service
profile is bound to the ONTs, you can add ONTs in batches by confirming the auto discovered
ONTs in batches to simplify the operation and increase the configuration efficiency. For
example, the preceding command can be modified as follows:
huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont-
lineprofile-id 10 ont-srvprofile-id 10
c. (Optional) Bind an alarm profile to the ONT.
In this example, bind the default alarm profile, namely alarm profile 1 to the
ONT.
huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1
huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1
5. Confirm that the ONT goes online normally.
After an ONT is added, run the display ont info command to query the current status
of the ONT. Ensure that Control flag of the ONT is active, Run State is online,
Config state is normal, and Match state is match.
huawei(config-if-gpon-0/1)#display ont info 1 1
---------------------------------------------------------------------
F/S/P :
0/1/1
ONT-ID :
1
Control flag : active //Indicates that the ONT is
activated.
Run state : online //Indicates that the ONT goes online
normally.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
186

Huawei EchoLife HG8110 Specifications

General

Brand	Huawei
Model	EchoLife HG8110
Category	Touch terminals
Language	English