Prerequisite
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see Enabling Layer 2 Service Channels Between an OLT and a
GPON ONT (on the OLT CLI).
Context
Issuing the XML configuration file on the U2000 applies to the following two typical scenarios:
l Configuring an ONT
l Configuring ONTs in batches
Procedure
l Configure an ONT.
1. Export the XML configuration file.
a. In the Physical Map navigation tree on the Main Topology tab page, double-
click the target OLT, or select the target OLT, right-click, and choose NE
Explorer.
b. In the navigation tree, choose GPON > GPON Management.
c. In the window on the right, choose GPON ONU.
d. On the GPON ONU tab page, set the search criteria to find the GPON ONU
records.
e. Select a required record from the ONT list, right-click, and choose Configure
Value-Added Service from the shortcut menu.
f. In the dialog box that is displayed, click Export to export the XML configuration
file, as shown in the following figure.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
267
To Next Page
Loading...
Need help?
General
