l The user connected to the POTS port that is enabled with caller emulation successfully
registers with the softswitch.
Context
The call emulation test verifies the basic calling services during service provisioning, and works
with the POTS line test to preliminarily locate a fault.
There are three types of call emulation tests: caller emulation test, callee emulation test, and
automatic emulation test. The call emulation test is irrelevant to protocols for the upstream
transmission. That is, it is applicable to SIP and H.248.
After the POTS port is configured with parameters for the caller emulation test and is enabled
with the caller emulation test, the offhook and dialing emulation can be performed on the POTS
port. If the called number is correct and the callee is free, the phone of the caller is ringing. After
picking up the phone, the callee hears his/her own voice.
Impact on the System
After a POTS port is enabled with the caller emulation test, services carried on the POTS port
are interrupted. These services will be recovered after caller emulation is complete.
Procedure
Step 1 In the Physical Map navigation tree on the Main Topology tab page, double-click the target
OLT, or select the target OLT, right-click, and choose NE Explorer.
Step 2 In the navigation tree, choose GPON > GPON Management.
Step 3 In the window on the right, choose GPON ONU.
Step 4 On the GPON ONU tab page, set the search criteria to find the GPON ONU records.
Step 5 Select a required record from the ONT list, and then click the The Ont's UNI Port Info tab in
the lower pane.
Step 6 Select a record from the list whose UNI Type is Pots, right-click, and choose Caller Emulation
Test from the shortcut menu.
Step 7 In the dialog box that is displayed, set Callee Number, as shown in the following figure.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 4 Maintenance and Troubleshooting
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
291
To Next Page
Loading...
Need help?
General
