Step 8 In the area circled in red and marked as 4, enter the upgrade passwords of the TE30s you wish
to upgrade.
Step 9 In the area circled in red and marked as 2, select the TE30s you wish to upgrade and click
Upgrade.
NOTE
To improve upgrade efficiency when the network bandwidth is insufficient, you can press Ctrl+ALT+C
in the window shown in Figure 13-2, and then set the upgrade policy in the displayed window.
Step 10 In the displayed dialog box, enter the upgrade password and click OK.
----End
Upgrading Specified Software Modules
You can upgrade specified software modules using the upgrade program installed on the
computer.
Procedure
Step 1 Power on the computer and TE30.
Step 2 Extract the compressed software upgrade package on the computer.
Step 3 Run UpgMaster.exe to display the window shown in Figure 13-2.
Step 4 Click Browser and select the Telepresence.dat file.
Step 5 Press Ctrl+ALT+P to display the window shown in Figure 13-3.
Step 6 Select the software modules you wish to upgrade.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 13 Maintenance
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
To Next Page
Loading...
Need help?
General
