About This Document
Overview
This document describes how to install, configure, maintain, and troubleshoot the HUAWEI
TE30 Videoconferencing Endpoint (TE30 or Endpoint for short). It also provides step-by-step
instructions on conferencing tasks.
When using this document, note the following:
l Except chapters 11 Web-based Remote Management, 12 Troubleshooting, and 13
Maintenance, which apply to the TE30 web interface, descriptions and configurations in
this document apply to the TE30 user interface controlled by the remote control (remote
controlled UI for short).
l To access the menu screen, press
on the remote control. You can find the option bar
on the left of the menu screen. This option bar is your interface to all functions except
calling.
l To move up, move down, hide, or show an icon in the option bar, select and then the
desired icon.
l To hide the option bar, press the left arrow key,
, or on the remote control.
l To show the option bar again, press on the remote control.
Intended Audience
This document is primarily intended for:
l Administrators
Administrators have access to all menus on the web interface and remote controlled UI.
When Advanced Settings is password-protected, administrators must enter the password
for access. For details about how to set the password, see 10.2.1 Setting the Administrator
Password.
l Common users
Common users have access to all menus except Advanced Settings on the web interface
and remote controlled UI.
HUAWEI TE30 Videoconferencing Endpoint
User Guide About This Document
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
To Next Page
Loading...
Need help?
General
