Video
Resolution
Refresh Rate (Hz)
1080p
l 60 if the output mode is VGA
l 24, 25, 30, 50, or 60 if the output mode is DVI, YPrPb, or HDMI
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Common Settings > Video Output. Set the
common video output parameters by referring to Table 4-3.
Table 4-3 Common video output parameters
Parameter Description Setting
GUI Specifies the video output port for
the remote controlled UI.
During a conference, you can
configure your TE30 to display
video on one monitor and the
remote controlled UI on another
monitor by setting this parameter
to a value different from the
MAIN OUT HD value.
The default value is MAIN OUT
HD.
Caption output Specifies the video output port for
captions.
NOTE
This parameter takes effect only
when the caption type is set to T.140.
The default value is MAIN OUT
HD.
Main output
interface
Specifies the main output port.
Only the main output port
supports combined picture output.
For details about the combined
picture function, see 8.4
Adjusting the Screen Layout.
The default value is MAIN OUT
HD.
To ensure video quality, retain the
default value.
Dual-screen Specifies whether the TE30
displays the video and
presentation on separate displays.
You can enable this function only
when your TE30 is connected to
two displays.
The default value is Disable.
Step 2 Select Save.
Step 3 Choose Advanced Settings > Settings > Video > Video Output. Set the advanced video output
parameters by referring to Table 4-4.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 4 Display and Camera
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30
To Next Page
Loading...
Need help?
General
