Huawei FusionModule5000 User Manual

Parameter Description Setting
Proxy server
address
Specifies the address of the proxy server.
If you set Server address to the SIP server
domain name, set this parameter to the IP
address bound to that domain name.
Example: 192.168.1.10
Site number Specifies the site number for your TE30.
If your TE30 registers with a SIP server,
endpoints that also register with the SIP
server can dial this site number to call your
TE30.
The site number can consist of
digits and letters.
Example: 12345
User name
and
Password
Specify the name and password by which
a SIP server identifies your TE30 after it
registers with the SIP server.
The value can consist of digits,
letters, and special characters,
such as @ # %.
Example: ab3@Joe
Server type Specifies the SIP server type.
l OCS: Select this option if your TE30
registers with the Microsoft Office
Communications Server (OCS) or
Microsoft Lync Server.
l CISCO VCS: Select this option if your
TE30 registers with the Cisco
TelePresence Video Communication
Server (VCS).
l Standard: Select this option if your
TE30 registers with any other SIP
servers.
The default value is Standard.
Transmissio
n type
Specifies the protocol used for SIP
signaling transmission.
l TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.
l UDP: Use the User Datagram Protocol
(UDP) to implement transmission with
reduced latency.
l TLS: Use the Transport Layer Security
(TLS) protocol to implement
transmission security. If you select this
option, you must import a certificate
when your TE30 registers with a SIP
server. For details, see 11.4.8
Importing a Certificate.
The default value is UDP.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 3 Network
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English