Parameter Description Setting
Video
request
handling
Specifies how your TE30 handles video
requests from a remote endpoint during a
point-to-point SIP audio call or multipoint
conference.
l Accept automatically: Your TE30
automatically accepts video requests
from the remote endpoint.
l Reject automatically: Your TE30
automatically rejects video requests
from the remote endpoint.
l Manual: Your TE30 prompts you to
accept video requests from the remote
endpoint.
The default value is Manual.
Step 2 Select Save.
----End
3.4 Setting Wi-Fi Parameters
To use your TE30 to implement video communication over a Wi-Fi network, set the Wi-Fi
parameters.
Setting Wi-Fi Client Parameters
When the Wi-Fi client function is enabled, your TE30 functions as a Wi-Fi client and access an
available Wi-Fi network after connecting to a wireless router.
Step 1 Choose Advanced Settings > Settings > Network > Wi-Fi > Wi-Fi Client. Select Enable for
the Wi-Fi Client parameter.
Your TE30 automatically scans for available wireless routers and lists them in the Wireless
access point list box. If you need to set a static IP address for your TE30, go to Step 2. Otherwise,
go to Step 4.
Step 2 Select Advanced Settings. On the displayed Advanced Wireless Settings screen, set IP
parameters by referring to 3.1 Setting IP Parameters.
Step 3 Select Save.
Step 4 Select Scan.
Your TE30 automatically scans for available wireless routers and lists them in the Wireless
access point list box.
Step 5 From Wireless access point, select the wireless router you want to connect to.
Step 6 Press
on the remote control. When prompted, enter the security key or password and select
Connect.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 3 Network
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
To Next Page
Loading...
Need help?
General
