Table 2-5 Custom parameters
Parameter Description Setting
Transparenc
y
Specifies the transparency of the
background photograph on the menu
screen.
If you set this parameter to Opaque, no
background photograph is displayed on
the menu screen.
If you set this parameter to values other
than Opaque, a background photograph is
displayed behind the menu screen with a
degree of transparency corresponding to
the value chosen.
The default value is 15%.
Display IP
address
Specifies whether to display the local IP
address on the conferencing screen.
This parameter is selected by
default.
Select
conference
control
operation
Specifies the conference control functions
you wish to display on the Conference
Control screen.
None
Display
position
Specifies the position where your site
name is superimposed on the video of your
site.
The default value is Lower right
corner.
Display
duration
Specifies the duration for displaying a site
name.
The default value is Always
display.
Display time
and zone
Specifies whether to superimpose the time
zone and time on the video of your site
after your site joins a conference.
This parameter is deselected by
default.
Font color Specifies the color in which a site name is
displayed.
The default color is white.
Font size Specifies the font size of a site name. The default value is Medium.
Font Type Specifies the typeface of a site name.
This parameter is available only when
Language is set to 中文(简体).
The default value is Boldface.
Bold Specifies whether a site name is displayed
in bold.
This parameter is deselected by
default.
Set the
horizontal
offset
Fine-tunes a site name's position leftward
and rightward on the video.
Value range: 0-96
The default value is 48.
Set the
vertical
offset
Fine-tunes a site name's position upward
and downward on the video.
Value range: 0-96
The default value is 48.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 2 Installation and Initial Configuration
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10