Huawei FusionModule5000 User Manual

Parameter Description Setting
Enable H.239 Specifies whether you can share
presentations during conferences.
NOTE
After you select this parameter, the
following parameters are available: H.
239 video protocol, H.239 video
bandwidth type, H.239 video
resolution, H.239 video bandwidth
(%), and Presentation plug-and-
share
This parameter is selected by
default.
H.239 video
protocol
Specifies the video protocol your
TE30 uses to encode presentations.
l If you select Auto, you must
also set Presentation
resolution.
l If you do not select Auto, you
must set H.239 video
resolution.
The default value is Auto.
H.239 video
resolution
Specifies the presentation format.
The available options vary
depending on the H.239 video
protocol value.
The default value is Auto.
Presentation
resolution
Specifies the presentation video
resolution.
l Smooth: Your TE30 uses a high
frame rate to ensure smooth
video.
l Sharp: Your TE30 uses a high
video resolution to ensure sharp
video.
The default value is Sharp.
H.239 video
bandwidth type
Specifies the mode for setting the
presentation video bandwidth.
l Auto: Your TE30 automatically
sets the presentation video
bandwidth based on the
bandwidth available.
l Manual: You must manually set
H.239 video bandwidth(%).
The default value is Auto.
H.239 video
bandwidth(%)
Specifies the percentage of call
bandwidth that presentations can
occupy.
The default value is 50.
Presentation
plug-and-share
Specifies whether your site
automatically shares presentations
with remote sites once presentation
input is detected.
The default value is Disable.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 6 Conference
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English