Figure 7-11 Installing the server
4. Tighten the captive screws on the mounting ears to secure the server.
Figure 7-12 Securing the server
Step 2 Install a cable management arm (CMA).
1. Insert the support levers into the outer rails on both sides. See (1) in Figure
7-13.
2. Insert the nail heads on the outer left rail into the holes on the outer support
lever of the CMA, and pull the CMA in the arrow direction. See (2) in Figure
7-13.
FusionServer Pro 1288H V5 Server
User Guide 7 Installation and Conguration
Issue 13 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 67
To Next Page
Loading...
