Huawei FusionServer Pro 2298 V5 - Page 53

Category Specications
Network ports Supports expansion capability of multiple types of
networks.
● LOM
– Supports two 10GE optical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– The LOM ports support NC-SI, WOL, and PXE.
● OCP 2.0 mezzanine card
– Supports on-demand
conguration.
– Supports a full range of OCP 2.0 mezzanine
cards. Use the Computing Product
Compatibility Checker to obtain information
about the
specic OCP 2.0 cards supported.
I/O expansion 5 PCIe 3.0 slots:
● One slot dedicated for an OCP 2.0 mezzanine card
and four for standard PCIe cards.
For details, see 5.7.2 PCIe Slots and 5.7.3 PCIe Slot
Description.
NOTE
The preceding information is for reference only. Use the
Computing Product Compatibility Checker to obtain
specic
information.
Ports Supports a variety of ports.
● Ports on the front panel:
– Two USB 3.0 ports
– One DB15 VGA port
● Ports on the rear panel:
– Two USB 3.0 ports
– One DB15 VGA port
– One RJ45 serial port
– One RJ45 system management port
– Two GE electrical ports
– Two 10GE optical ports
● Built-in port:
– One USB 3.0 port
NOTE
You are not advised to install the operating system on the USB
storage media.
Huawei FusionServer Pro 2298 V5 Server
Technical White Paper 6 Product Specications
Issue 05 (2020-09-03) Copyright © Huawei Technologies Co., Ltd. 47