Figure 9-21 Searching for devices
● During the process of Search for Device, do not perform upgrade operations (such as
upgrading through the app, network management system, or WebUI).
● When you click Search for Device, cable connections (DC and AC) will be checked
before device search (not applicable to third-party devices), and device addresses will be
automatically allocated.
● After the cable connection check and device search are complete, if a cable connection
alarm is generated, you can click the alarm icon
to view the corresponding alarm
information.
● If an alarm is generated when the cable connection check fails, click the alarm icon
to view the alarm cause and handling suggestions. After the fault is rectied, check the
cable connection again.
●
After the cable connection check and device search are complete, click to view the
corresponding topology information.
● After a device is added or deleted, you need to click Search for Device again.
Otherwise, the system topology will not update.
Step 3 (Optional) Change the grid code to ensure that the new Smart PCS grid code
matches the local standard code.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 9 Device Maintenance
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 82
To Next Page
Loading...