Huawei LUNA2000 - Setting the Grid-Tied ESS Mode

Figure 3-3 Inv
erter (with batteries) + inverter (with batteries) (dashed boxes
indicate optional components)
Table 3-2 Mapping r
elationship
Inve
rter
SUN2000-1 SUN2000-2
Mod
el
SUN2000-(2KTL–6KTL)-L1/
SUN2000-(3K
TL–10KTL)-M1
SUN2000-(2KTL–6KTL)-L1/SUN2000-
(3KTL–10KTL)-M1
NO TE
The parameters of each battery need to be set separately. When the grid charging function
is enabled, the surplus po
wer generated by one inverter can be used to charge the other
inverter.
3.1.2 Setting the Grid-tied ESS Mode
The grid-tied ESS has three main working modes: self-consumption, time-of-use,
and excess fed to the grid.
LUNA2000-(5-30)-S0
User Manual 3 Application Scenarios and Settings
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 23