Huawei LUNA2000 - Installing DC Input Power Cables

5.3.2 Installing DC Input Power Cables
Connect DC input power cables to the inverter
Insert the positive and negative battery connectors (Staubli) into the
corresponding DC input terminals (BAT+ and BAT–).
NO TE
The DC input terminals (BAT+ and BAT–) on the left and right sides of the battery are the
same.
Step 1 Assemble DC connectors.
Figure 5-8 Assembling DC connectors
CA UTION
Use Staubli MC4 positive and negative metal terminals and DC connectors. Using
incompatible positive and negative metal terminals and DC connectors may result
in serious consequences. The caused equipment damage is not covered under any
warranty or service agreement.
LUNA2000-(5-30)-S0
User Manual 5 Electrical Connection
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 56