Figure 3-12 Setting the o-grid power grid code
If the mains is unavailable, you need to set the o-grid power grid code. In o-grid mode,
the battery must be congured.
The battery does not discharge when it is discharged to the SOC. When sunlight is available
on the next day, the battery starts to supply power to loads after being charged to a certain
amount of electricity.
LUNA2000-(5-30)-S0
User Manual 3 Application Scenarios and Settings
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 35
To Next Page
Loading...
