Figure 4-2 Floor-mounted installation dimensions
Procedure
Step 1 Align the oor support with the wall surface and keep the support 10 mm to 15
mm away from the wall surface. Level the hole positions using a level, and mark
the hole positions for installing the
oor support using a marker. Align the
marking-o template with the surface of the oor mounting kit, determine the
drilling hole positions on the wall for securing the power control module, and
mark the positions using a marker.
Step 2 Install the
oor support.
When drilling holes, avoid the water pipes and power cables buried in the wall.
M6x60 expansion bolts delivered with the battery are used to install the oor support and
power control module. If the length and quantity of the bolts do not meet installation
requirements, prepare M6 stainless steel expansion bolts by yourself.
LUNA2000-(5-30)-S0
User Manual 4 System Installation
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 40
To Next Page
Loading...
