Figure 4-4 Installing expansion bolts
Step 3 Place the rst battery expansion module on the oor support, install the
connecting pieces on both sides, and tighten the four screws. Install the remaining
battery expansion modules and power control module from bottom to top.
After installing a module, install and tighten the connecting pieces and screws on
the left and right sides of the module, and then install the next module.
LUNA2000-(5-30)-S0
User Manual 4 System Installation
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 42
To Next Page
Loading...
