Huawei LUNA2000 - System Power-On

Connecting Cascading DC Input Power Cables (Cascading)
Connect the DC input terminals (BAT+ and BAT–) between the power control
module by referring to 5.3.2 Installing DC Input Power Cables.
Terminals
NO TE
Identify the signal terminal pins according to the following gures, and connect cables
according to Table 5-3. When you insert the communications terminal of the power control
module, the silk screens on the two sides of the communications port are dierent. Insert
the communications terminal according to the following
gures.
Figure 5-14 Inserting the terminal
Connecting a Signal Cable (Cascading)
Prepare a signal cable terminal for connecting the power control module.
LUNA2000-(5-30)-S0
User Manual 5 Electrical Connection
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 61