Step 5 Hold down the black start button for 5s to activate the battery. The power control
module LED blinks three times and then the green indicator is steady on. The
battery comprehensive LED blinks three times and then the green indicator is
steady on. The ring LED blinks three circles.
Step 6 Connect the FusionSolar app to the inverter, choose Maintenance > Battery
maintenance > Recharge, start battery recharge, and monitor the charge status
of the lithium battery in real time until the recharge is complete.
Step 7 Conrm that the recharge is complete if ve indicators of the ring LED are on and
the comprehensive LED of the battery expansion modules is steady green.
Step 8 After the battery is charged, switch o the inverter input AC circuit breaker and
then the battery input circuit breaker. If other batteries need to be charged, repeat
the preceding steps.
----End
LUNA2000-(5-30)-S0
User Manual 7 System Maintenance
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 85
To Next Page
Loading...
