For enhanced security, you can only enroll a ngerprint when Pattern, 4-digit PIN,
Custom PIN, or Password is being used as the unlock method. You will still need to use
your lock screen password to unlock your phone after a restart or if ngerprint
recognition fails.
1 Go to Settings > Biometrics & password > Fingerprint ID, and follow the
instructions to set or enter the lock screen password.
2 Touch New in-screen
ngerprint to begin enrolling your ngerprint.
3 Place your ngertip on the in-screen ngerprint sensor. When you feel a vibration, lift your
nger then press again. Move your nger around to enroll dierent parts of it.
4 When the enrollment has been completed, touch OK.
When the screen is locked, lift your phone and the in-screen ngerprint sensor will appear.
You can now place your nger on the ngerprint sensor to unlock the screen.
Rename or Delete a Fingerprint
1 Go to
Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 In the Fingerprint list section, touch an enrolled
ngerprint to rename or delete it.
Settings
166
To Next Page
Loading...
