Huawei PowerCube 5000 - SmartLi Technical Specifications

PowerCube 5000
User Manual (SmartLi 100Ah)
11 Technical Specifications
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
149
Parameter
Description
MPPT)
Maximum backfeed current
to the PV array
0 A
Minimum startup voltage
About 350 V DC (initial startup value)
MPPT voltage range
250–900 V DC
Full-load MPPT voltage
range
480–850 V DC
Rated input voltage
620 V DC
Number of inputs
5
Battery
Rated battery voltage
512 V DC/535 V DC
Maximum battery current
500 A
Output
Rated output power
150 kVA
Maximum apparent power
165 kVA
Maximum AC output power
165 kVA
Rated output voltage
380 V AC/400 V AC/415 V AC
Frequency
50 Hz/60 Hz
Maximum output current
300 A
Power factor
0.8
DG
output
Rated input voltage
380 V AC/400 V AC/415 V AC
Maximum AC input current
300 A
Frequency
50 Hz/60 Hz
Table 11-2 SmartLi
Item
Parameter
Description
Physical
parameters
Cabling mode
Cables are routed in and out from the bottom.
IP rating
IP21
Dimensions (H x W x
D)
2000 mm x 1200 mm x 850 mm (excluding the
IP21 component)
2159 mm x 1300 mm x 1066 mm (including the
IP21 component)
Communication
Supports RS485 and CAN.
Weight
Equipment (including 14 ESMs): 1140 kg