Quidway AR 28 Series Routers Installation Manual Chapter 6 Router Maintenance
Huawei Technologies Proprietary
6-8
Figure 6-3 Sending File interface
Step 6: After completing download, the system begins writing to Flash memory and
upon its completion outputs the following information:
Download completed.
For an AR 28 series router, the system also prompts you to select file type upon
completion of downloading.
please select file to be saved as
1. main application file
2. backup application file
3. secure application file
4. cancel downloading
Enter your choice(1-4):
The system starts writing to Flash memory after you enter your choice and displays:
Writing to flash memory...
Please wait,it needs a long time .Please wait...
########################################################
Writing FLASH Success.
Please use 9600 bps.Press <ENTER> key to reboot the system.
Restore the baud rate of the console terminal to 9600 bps as prompted, disconnect the
terminal and dial again. Then, you can see the system boot banner.
2) Upgrading the entire Boot ROM image
Step 1: Enter Boot Menu, and select <9> to enter Boot ROM Download Menu as
follows:
Boot ROM Download Menu:
1: Download Boot ROM with XModem
2: Download Extended Segment of Boot ROM with XModem
To Next Page
Loading...
