Quidway AR 28 Series Routers Installation Manual Chapter 6 Router Maintenance
Huawei Technologies Proprietary
6-11
3: Exit to Main Menu
Enter your choice(1-3):1
3) In Net Port Download Menu, select <1> for example to change the download
parameters as follows:
Change Boot Parameter:
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : fei0
processor number : 0
host name : 8040
file name : M8240ram.arj
inet on ethernet (e) : 169.254.10.10
inet on backplane (b):
host inet (h) : 169.254.10.11
gateway inet (g) :
user (u) : 8040
ftp password (pw) (blank = use rsh):
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) :
z When upgrading with TFTP, set these parameters:
file name: Name of the file to be downloaded
inet on ethernet (e): IP address of the Ethernet interface for downloading
host inet (h): IP address of TFTP Server
flags (f): 0x80
target name (tn): Name for the file to be saved on Flash memory. If no name is provided,
the one used for the last upgrade is used. If the file name already exists, the following
message appears after the file is downloaded asking whether you need to overwrite the
original file:
Loading...done
11162108 bytes downloaded.
flash:/main.bin already exist.
Overwrite it?(Y/N):
Enter <Y> to overwrite the original file or <N> to return to the Net Port Download Menu.
z When upgrading with FTP, set these parameters:
file name: Name of the file to be downloaded
inet on ethernet (e): IP address of the Ethernet interface for downloading
host inet (h): IP address of FTP Server
user (u): User name, same as the one configured at FTP Server.
To Next Page
Loading...
