Quidway AR 28 Series Routers Installation Manual Chapter 6 Router Maintenance
Huawei Technologies Proprietary
6-12
ftp password (pw) (blank = use rsh): Password, which must be consistent with that at
FTP Server
flags (f): 0x0
target name (tn): Name for the file to be saved on Flash memory. If no name is provided,
the one used for the last upgrade is used. If the file name already exists, the following
message appears after the file is downloaded asking whether you need to overwrite the
original file:
Loading...done
11162108 bytes downloaded.
flash:/main.bin already exist.
Overwrite it?(Y/N):
Enter <Y> to overwrite the original file or <N> to return to the Net Port Download Menu.
After you configure these parameters, the system saves them automatically.
4) Press <Enter> to return to Net Port Download Menu, and there select <2>. The
console screen displays:
boot device : fei
unit number : 0
processor number : 0
host name : 8040
file name : Q8040.BIN
inet on ethernet (e) : 10.110.27.235
host inet (h) : 10.110.27.231
user (u) : 8040
ftp password (pw) : 8040
flags (f) : 0x80
Attached TCP/IP interface to fei0.
Subnet Mask: 0xfffff800
Attaching network interface lo0... done.
Loading...
NET download completed...
read len = [04378489]
Please wait,it needs a long time
##########################################################################
##############################################################
###########################
Writing Vrpsoftware File Succeeds!
Press <Enter> to reboot the system.
To Next Page
Loading...
Need help?
General
