2 Configuring the IPMI Settings
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
4
Figure 2-3 Set LAN Con figuration Interface
----End
To Set the IP/MAC Addresses Using the IPMICFG Utility
Step 1 Run the IPMICFG utility from the bootable CD that came with your shipment.
Step 2 Follow the instructions given in the Readme.txt file to configure Gateway IP/ Netmask IP
addresses, to enable/disable DHCP and to configure other IPMI settings. See Table 2-1.
Table 2-1 Set the IP/MAC Addresses
Values Meanings
-m Show IP and MAC
-m IP Sets IP(format:###.###.###.###)
-m MAC Sets MAC(format:##.##.##.##.##.##)
-k Shows Subnet Mask
-k Mask Sets Subnet Mask(format:###.###.###.###)
-dhcp Gets the DHCP status
-dhcp on Enables the DHCP
-dhcp off Disables the DHCP
User Guide
Issue 04 (2014-09-15)
RH2488 V2 BMC
To Next Page
Loading...
